FREE SHIPPING

Victron Energy Phoenix Smart IP43 SLA/LiFePO4 Charger 12V 30A (3 output) 230V PSC123053085

VECIP43-12/30-3
Victron Energy Phoenix Smart IP43 SLA/LiFePO4 Charger 12V 30A (3 output) 230V PSC123053085

$706 inc GST.

Our Best Price

Qty:     

Shipping & Handling Calculator:

Post Code:
Model No VECIP43-12/30-3
Selling Unit EACH
Description Victron Energy Phoenix Smart IP43 SLA/LiFePO4 Charger 12V 30A (3 output) 230V PSC123053085
Original Brand Victron Energy PSC123053085d
Chemistry Lithium Iron Phosphate / Lead Acid (LiFePO4/SLA)
Voltage 12V
Brand Victron Energy
Size 30A
Width 100mm
Height 180mm
Length/Breadth/Depth 249mm
Weight 3500g
Brand Victron Energy

This charger requires an AU/NZ AC Power Cord - Sold separately

Click here to view

 

12 Volt 30 Amp

Bluetooth Smart enabled
Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available.

Phoenix Smart (3): three full current outputs to charge 3 battery banks
All outputs can supply the full rated output current. *But the total of the 3 outputs combined can never exceed the current rating of the charger

Automatic voltage compensation
The charger compensates for voltage drop over the DC cabling by slightly increasing output voltage when the DC current increases. Please see the manual for details.

Adaptive 5-stage charge algorithm: bulk – absorption – recondition – float – storage
The Phoenix Smart Charger features our well-known ‘adaptive’ battery management system that can be preset to suit different types of batteries. The ‘adaptive’ feature will automatically optimise the charge process relative to the way the battery is being used.

The right amount of charge: variable absorption time
When only shallow discharges occur (a yacht connected to shore power for example) the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the
absorption time is automatically increased to make sure that the battery will be fully charged.

Preventing damage due to excessive gassing: the BatterySafe mode
If, in order to quickly charge a battery, a high charge current in combination with a high absorption voltage has been chosen, the charger will prevent damage due to excessive gassing by automatically
limiting the rate of voltage increase once the gassing voltage has been reached

Less maintenance and aging when the battery is not in use: the Storage Mode

The Storage Mode kicks in whenever the battery has not been subjected to discharge during 24 hours.
In the Storage Mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to
‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.

Also charges Li-ion (LiFePO4) batteries
Charger on-off control can be implemented by connecting a relay or open collector optocoupler output from a Li-ion BMS to the remote on-off port.
Alternatively full control of voltage and current can be achieved with Bluetooth.

Fully programmable charge algorithm
The charge algorithm can be programmed with help of Bluetooth or the VE.Direct interface.
Three preprogrammed algorithms can be selected with the mode button (see specifications).

Remote on-off
The remote on/off consists of two terminals: Remote H and Remote L.
A remote on/off switch or relay contact can be connected between H and L.
Alternatively, terminal H can be pulled high, or terminal L can be pulled low.
See manual for details.

VE.Direct interface
For a wired data connection to a Color Control panel, PC or other devices.
Please see the VictronConnect app under Downloads / Software on our website.

Programmable relay
Can be programmed using the VE.Direct interface or a Bluetooth enabled device to trip on an alarm or other events.

 



Featured Brands